37 PED 2014/68/EU S>max V>max P>max subject to alterations GAS SPRING, STANDARD, WITH EXTERNAL THREAD .00260. 250 200 100 150 50 50 60 70 80 90 100 110 120 130 140 150 5 100 125 050 025 25 38 75 80 0 125 100 50 63 10131619 080 063 038 016 013 019 010 1,00 1,40 1,35 1,30 1,25 1,20 1,15 1,10 1,05 force daN charge pressure (bar) stroke in mm pressure rise factor nominal stroke Initial spring force versus charge pressure Spring force Diagram displacement versus stroke rise Pressure rise factor accounts for displacement but not external influences! Note: Initial spring force at 150 bar = 260 daN Order No for spare parts kit: 2480.15.00250 (Stroke length 10 and 13 not repairable) Pressure medium: Nitrogen N2 Max. filling pressure: 150 bar Min. filling pressure: 20 bar Working temperature: 0°C to +80°C Temperature related force increase: ± 0.3%/°C Max. recommended extensions per minute: approx. 80 to 100 (at 20°C) Max. piston rod speed: 1.8 m/s Fixing: Installation with ring nut(s) 2480.005.00250 can be done with one or two ring nuts. If the hole in the bolster plate is not threaded, two ring nuts are needed. Holes threaded M 38 × 1,5 require one only ring nut for mounting of the gas springs. Mounting with a threaded flange plate has the advantage of a degree of adjustability as far as the flange screws permit, moreover it is often found easier to make do with a clearance hole in the tool plate. Locking is by way of two lock screws with thrust plugs, provided in the threaded flange. Diameter of through-hole in tool plate = 38 mm – plus four tapped holes M 8. 2480.35.00250. ø15 M6 3,6 4 ø35,7 M38x1,5 ±0,25 l min. l s M6 ø30 2,8 2 6 2,5 14 5 s Order No (Stroke max.) lmin. l Gas volume [l] Weight [kg] 2480.35.00250.013 12.7 62.7 75.4 0.018 0.38 2480.35.00250.025 25 75 100 0.027 0.44 2480.35.00250.038 38 88 126 0.037 0.5 2480.35.00250.050 50 100 150 0.046 0.55 2480.35.00250.063 63.5 113.5 177 0.057 0.63 2480.35.00250.080 80 130 210 0.069 0.7 2480.35.00250.100 100 150 250 0.102 0.93 2480.35.00250. Gas spring, Standard, with external thread
RkJQdWJsaXNoZXIy MTIwNzY0