D297 4 d 105 71 2 m m d 2 d 60 116 4 d 5 d 5 d 202.94. 202.94. .1 202.94. .2 61 3 d 3 d l8 min. 20 l8 11 CAGE RETAINER Description: Cage unit allows both accurate cage centring as well as a variably adjustable cage feed length (l8 ). The cage feed length can be adjusted by turning the thread m in the column. A cheese head screw in accordance with DIN EN ISO 4762 serves as anti-rotation device. Material: Steel Note: The following guide pillars can be equipped with this cage retainer: 202.19. .30.94 2021.46. .30.94 Screws are not included. Fixing: Socket cap screws DIN EN ISO 4762 for nominal diameter ød : 32 / 40 = 2192.12.05. 50 = 2192.12.06. 63 / 80 = 2192.12.08. Length calculation of the safety screw fastening : Cage retainer 202.94. .1 : Screw length = Cage feed length + 25 mm Cage retainer 202.94. .2 : Screw length = Cage feed length - 20 mm 202.94. Cage retainer Order No Nominal-ø Pillar-ø d2 d3 d4 d5 m l8 - Cage advance length 202.94.032.1 32 30/32 35 25 5.5 10 M16x1,5 5-50 202.94.040.1 40 38/40 43 33 5.5 10 M16x1,5 5-50 202.94.050.1 50 48/50 53 43 6.6 11 M20x1,5 5-50 202.94.063.1 63 60/63 66 56 9 15 M30x1,5 5-50 202.94.080.1 80 80 88 74 9 15 M30x1,5 5-50 202.94.032.2 32 30/32 35 25 5.5 10 M16x1,5 50-100 202.94.040.2 40 38/40 43 33 5.5 10 M16x1,5 50-100 202.94.050.2 50 48/50 53 43 6.6 11 M20x1,5 50-100 202.94.063.2 63 60/63 66 56 9 15 M30x1,5 50-100 202.94.080.2 80 80 88 74 9 15 M30x1,5 50-100 Mounting example
RkJQdWJsaXNoZXIy MTIwNzY0