F125 subject to alterations 9 d +0,5 +1 5 d h6 F6 6 d 8 d ø6 7 d * 11 d 1 d g6 H7 3 l * 1,4 2478.20.20. working stroke 2082.70. Guide bush with collar as per DIN 9834/ISO 9448 Bronze with solid lubricant (see chapter D) 2072.45.10 Holding piece (2x) incl. socket head screw M6x16 as per DIN EN ISO 4762 (see chapter D) additional for damped execution: 2478.20.20.3 Damper 2478.20.20.4 Spacer sleeve 2482.74. Gas spring 2478.20.20.1. Guide pillar order separately: 2192.12.08.020 (3x) Socket head screw M8x20 as per DIN EN ISO 4762 (see chapter C) 2478.20.20.2. Sleeve frame height = 105 mm drain hole * * to be provided by the customer distance in lifted condition 2192.12. Socket head screw (1x) as per DIN EN ISO 4762 (see chapter C) Note: Frame height = 105 mm Depending on the frame height and the installation type of the sleeve 2478.20.20.2. (l3 - tapped bore in the frame or cut-out in the cast), the countersink varies for the determination of the lifting path. Size 2* - version, damped Maximum lifting path 66 mm Lifting path 66 mm; Distance height 0 mm Lifting path 30 mm; Distance height 36 mm Size 3* - version, damped Maximum lifting path 80 mm Lifting path 80 mm; spacing height 47 mm Lifting path 70 mm; spacing height 57 mm In order to maintain the clearance of 1.4 mm in a raised state (dampener to bushing), a distance sleeve is to be used between the damper and guide post flange. * Distance height determined at the customer (delivery length: 61 mm) LIFTING UNIT (NOT DAMPED/DAMPED) TO MERCEDES-BENZ 2478.20.20. Lifting unit (not damped/damped) to Mercedes-Benz Size Working stroke Working stroke, damped d1 d5 d6 d7 * d8 d9 d11 l3 * 1 5 - 35 – 32 40 66 40 60 85 67 2 40 - 70 30 - 66 32 40 66 40 60 85 67 3 75 - 115 70 - 80 32 40 66 40 60 85 67 - *to be supplied by customer The lifting unit must be ordered in three sizes with the respective order numbers of the individual parts: Size 1 2 3 Guide pillar 2478.20.20.1.01 2478.20.20.1.02 2478.20.20.1.03 Sleeve – 2478.20.20.2.02 2478.20.20.2.03 Guide bushing 2082.70.032 2082.70.032 2082.70.032 Gas spring 2482.74.00090.038.2 2482.74.00090.080.2 2482.74.00090.125.2 Holding piece (2x) incl. socket head screw M6x16 DIN EN ISO 4762 2072.45.10 2072.45.10 2072.45.10 Socket cap screw (1x) DIN EN ISO 4762 2192.12.06.030 2192.12.06.020 2192.12.06.030 additional for damped execution: Damper – 2478.20.20.3 2478.20.20.3 Spacer sleeve – 2478.20.20.4 2478.20.20.4
RkJQdWJsaXNoZXIy MTIwNzY0